O-RING CORD 6.00 MM

SNORN0600 is an o-ring cord and can be used in applications. The material used on this o-ring cord is made of NBR 70 shore.

The product has a height of 6 mm.

About the sealing profile SNOR

O-ring cord can be cut to the desired length on request. The two ends can then be glued together with a suitable adhesive to form an o-ring. Ends can also be vulcanized. This is done in the case where there is an urgent need for an o-ring in a special size, which is not in stock or can be obtained in time.

About the material NBR

Nitrile is a widely used nitrile butadiene and acrylo nitrile polymer. The NBR formulas typically contains between 30% and 50% acrylonitrile (ACN). The NBR which has a working temperature between -40°C and +100°C show extremely high resistance under different working conditions such as mineral oils (H, H-L and H-LP type lubricating oils) and grease and mineral based fire resistance oils (HFB and HFC group oils), vegetable and organic oils, and aliphatic hydrocarbons (propane, butane, petrol). NBR is not recommended for aromatic hydrocarbons (benzene, trichloroethylene, HFD type fire resistance oils), glycol and ether contained break hydraulics.

Tolerances