U-RING 60X50X10 NBR

STE102-060-050-010N is a u-ring that works as single acting and can be used in piston applications. The material used on this u-ring is made of NBR 90 shore. The maximum allowed pressure is 160 BAR.

The dimensions has an inner diameter of 50 mm, an outer diameter of 60 mm and a height of 10 mm.

About the sealing profile STE102

STE102 can only be used as a piston seal due to the shorter outer sealing lip design.

About the material NBR

Nitrile is a widely used nitrile butadiene and acrylo nitrile polymer. The NBR formulas typically contains between 30% and 50% acrylonitrile (ACN). The NBR which has a working temperature between -30°C and +105°C (peak temp. at +130°C) show extremely high resistance under different working conditions such as mineral oils (H, H-L and H-LP type lubricating oils) and grease and mineral based fire resistance oils (HFB and HFC group oils), vegetable and organic oils, and aliphatic hydrocarbons (propane, butane, petrol). NBR is not recommended for aromatic hydrocarbons (benzene, trichloroethylene, HFD type fire resistance oils), glycol and ether contained break hydraulics.