OTVS08510512 is an oil seal and can be used in rotary/axial moving applications. The material used on this oil seal is made of VITON 80 shore. The maximum allowed pressure is 0,5 BAR.
The dimensions has an inner diameter of 85 mm, an outer diameter of 105 mm and a height of 12 mm.
The OTS profile has a metal ring in the core of the oil seal which provides stability. This type of profile also has an additional dust lip which helps keep dirt and dust out. The outer part is typically molded from NBR, but is also available in many other materials. In most applications, oil seals are used to provide a seal for oil, grease or water against rotating parts.
It is resistant to any type of grease oil and solvent between -30°C and +200°C. Better results can be obtained in low gas transfer systems. It has a good resistance to a range of different chemicals (especially greases, fuels, aliphatic and aromatic hydrocarbons, some fire resistant oils).
Designation | Olietætning |
Inner diameter | 85.00 |
Outer diameter | 105.00 |
Height/Width | 12 |
Speed (M/S) | 35 |
Max pressure (BAR) | 0,5 |
Shore | 80 |
Temperature (CELSIUS) | -25/+200 |
Tarifnumber | 84842000 |
Designation | Oil seal |
Material | VITON |
Area of use | Rotary/Axial moving applications |
We are specialists in ball bearings, seals and transmissions. Official Schaeffler partner with access to FAG and INA products.
Aabyvej 67-69, DK-8230 Aabyhoej
+45 86 15 01 11
mw@mw.dk
VAT no. DK29627517
© 2024 M. Wilhelmsen A/S All Rights Reserved